1. Aluminum honeycomb panel lifting lug installation
The popular saying is to add lifting ears to the back of the aluminum honeycomb panel, which is the corner code. The angle code is generally added on the four sides of the honeycomb panel. It can be dislocated, so that the two corners will not be topped together, and the other three-sided lifting ears can be fixed with screws.
2. Installation method of aluminum honeycomb panel buckle strip
The strip buckle is an installation accessory, which is inlaid on the back of the aluminum honeycomb panel. On the steel frame, you can slide left and right to adjust the size of the gap at any time. This installation method needs to pay attention to the installation of the honeycomb panels in the top row. It must be flush with the edge of the honeycomb panel so that it can be fixed on.
3. Aluminum honeycomb panel flanging installation
The flanging installation is aimed at the home decoration ceiling, and the processing is complicated. It is necessary to wrap the edge strips on the four sides of the cut honeycomb panel, and the edge strips need to be screwed, which can only be done by hand, and the efficiency is very low. Flip the edge-wrapped honeycomb panel over onto the set dragon skeleton, and it is enough to hold it firmly when there is a keel.
